Tools & Accessories

INCLUDES: (1) Sue Tool (1) Kemper JA20 Modeling Tool (1) Notched Rib (1) Foot Maker

The Foot Maker is used to cut beveled stripes of clay to easily provide equal sized edges to efficiently construct a foot. See our YouTube videos f...

This is a Mud Tools rib cut in half to use the center hole as an edge rounding/burnishing function. Haven't found a rounding tool that can last lon...

Compass turned into a measuring device, to score a line to develop a consistent lip outside of the body of the form.  Works well with WA system and...

Kemper wood JA 20 clay modeling tool. Great for cleaning and joining a clay foot.     View this post on Instagram ...

A thin, fine pointed knife for delicate, low drag clay cutting. 6" long - 2 1/4" blade.

Surform rasp/shaver. Great for cleaning leatherhard edges.     View this post on Instagram A post shared by GR ...

Trimming Tool with one flat end and one round end.     View this post on Instagram A post shared by GR Pottery ...

Created by Dirty Girls Pottery Tools. Ergonomic cut off wire.

Created by Dirty Girls Pottery Tools. Ergonomic cut off wire.

Created by Dirty Girls Pottery Tools.  Made of fine quality oiled hardwood, stainless steel wire and brass components.     View this p...

Standard 1/2" Spacer. Spacers are used to place under formed piece to put the rim at an angle to avoid rim from flopping/slumping in firing. 

This 1/4" is used to help with smaller lips and shallower angles of lips. Spacers are used to place under formed piece to put rim at an angle to av...

Our Standard 1/2" Spacer. Spacers are used to be placed under a completed piece and Form to put the rim at an angle so the rim doesn't flop/slump ...

The WA Spacer comes with a pin. All Forms are measured in inches.   Weight: 0.23 lbs

(4) Spacers (4) Pins  4" in diameter fits into WA.  Then used to develop an angled lip. Weight: 0.8 lbs

Available in Yellow

Available in Yellow 

The WA2 Key houses all the RD2 Forms with a 2-pin Key system. Includes: (1) WA2 Key - Includes 2 Pins

2 pack of replacement blades. Compatible with the Surform tool.

Our New Studio Boards are light weight and are a 1/4” thick. Studio boards are to be used as a work surface and to assist when flipping work. They ...

Our New Studio Boards are light weight and are a 1/4” thick.  Studio boards are to be used as a work surface and to assist when flipping work. The...

Our New Studio Boards are light weight and are a 1/4” thick.  Studio boards are to be used as a work surface and to assist when flipping work. The...